時間:2015/6/28來源:IT貓撲網作者:網管聯盟我要評論(0)
ifconfig...沒有看到eth0.。然后重啟網卡又報下面錯誤。
故障現象:
service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]
解決辦法:
首先,打開/etc/udev/rules.d/70-persistent-net.rules內容如下面例子所示:
# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
記錄下,eth1網卡的mac地址00:0c:29:50:bd:17
接下來,打開/etc/sysconfig/network-scripts/ifcfg-eth0
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
將 DEVICE="eth0" 改成 DEVICE="eth1" ,
將 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"
最后,重啟網絡
# service network restart
或者
# /etc/init.d/network restart
正常了。
關鍵詞標簽:CentOS,Linux,VMware
相關閱讀
熱門文章 安裝紅帽子RedHat Linux9.0操作系統教程使用screen管理你的遠程會話GNU/Linux安裝vmware如何登錄linux vps圖形界面 Linux遠程桌面連
人氣排行 Linux下獲取CPUID、硬盤序列號與MAC地址linux tc實現ip流量限制dmidecode命令查看內存型號linux下解壓rar文件安裝紅帽子RedHat Linux9.0操作系統教程Ubuntu linux 關機、重啟、注銷 命令lcx.exe、nc.exe、sc.exe入侵中的使用方法查看linux服務器硬盤IO讀寫負載